Sulfur Totally Explained

Sulfur or sulphur (IPA: /ˈsʌlfə(ɹ)/, see spelling below) is the chemical element that has the symbol S and atomic number 16. It is an abundant, tasteless, multivalent non-metal. Sulfur, in its native form, is a yellow crystalline solid. In nature, it can be found as the pure element or as sulfide and sulfate minerals. It is an essential element for life and is found in two amino acids, cysteine and methionine. Its commercial uses are primarily in fertilizers, but it's also widely used in gunpowder, matches, insecticides and fungicides.

Notable characteristics

At room temperature, sulfur is a soft bright yellow solid. Elemental sulfur has only a faint odor similar to that of matches. The odor associated with rotten eggs is from hydrogen sulfide (H₂S) and organic sulfur compounds. Sulfur burns with a blue flame that emits sulfur dioxide, notable for its peculiar suffocating odor. Sulfur is insoluble in water but soluble in carbon disulfide and to a lesser extent in other non-polar organic solvents such as benzene and toluene. Common oxidation states of sulfur include −2, +2, +4 and +6. Sulfur forms stable compounds with all elements except the noble gases. Sulfur in the solid state ordinarily exists as cyclic crown-shaped S₈ molecules. Sulfur has many allotropes besides S₈. Removing one atom from the crown gives S₇, which is responsible for sulfur's distinctive yellow color. Many other rings have been prepared, including S₁₂ and S₁₈. By contrast, its lighter neighbor oxygen only exists in two states of allotropic significance: O₂ and O₃. Selenium, the heavier analogue of sulfur can form rings but is more often found as a polymer chain. The crystallography of sulfur is complex. Depending on the specific conditions, the sulfur allotropes form several distinct crystal structures, with rhombic and monoclinic S₈ best known.
A noteworthy property of sulfur is that its viscosity in its molten state, unlike most other liquids, increases above temperatures of 200°C due to the formation of polymer chains. The molten sulfur also becomes dark red in color above this temperature due to the presence of free valences on terminal atoms of the polymer chains. However, after a specific temperature is reached, the viscosity is reduced because there's enough energy to break the chains. Amorphous or "plastic" sulfur can be produced through the rapid cooling of molten sulfur. X-ray crystallography studies show that the amorphous form may have a helical structure with eight atoms per turn. This form is metastable at room temperature and gradually reverts back to crystalline form. This process happens within a matter of hours to days but can be rapidly catalyzed.

Applications

In the late 18th century, furniture makers used molten sulfur to produce decorative inlays in their craft. Because of the sulfur dioxide produced during the process of melting sulfur, the craft of sulfur inlays was soon abandoned. Molten sulfur is sometimes still used for setting steel bolts into drilled concrete holes where high shock resistance is desired for floor-mounted equipment attachment points. Pure powdered sulfur was also used as a medicinal tonic and laxative.
Sulfur has many modern industrial uses. Through its major derivative, sulfuric acid (H₂SO₄), sulfur ranks as one of the most important industrial raw materials. It is of prime importance to every sector of the world's economies.
Sulfuric acid production is the major route in industrial sulfur chemistry on the way to many end-uses, and production and consumption of sulfuric acid has been regarded as one of the best indices of a nation's industrial development. (External Link

). For example, more sulfuric acid is produced in the United States every year than any other industrial chemical; although interestingly the rate of increase of U.S. production has encountered shocks since the mid 1960s, mirroring U.S. loss of industrial post-World War II world influence. Principal uses for the acid include ore processing, fertilizer manufacturing, oil refining, wastewater processing, and chemical synthesis.
Sulfur is also used in batteries, detergents, the vulcanization of rubber, fungicides, ie skin care soaps, and in the manufacture of phosphate fertilizers. Sulfites are used to bleach paper and as a preservative in wine and dried fruit. Because of its flammable nature, sulfur also finds use in matches, gunpowder, and fireworks. Sodium or ammonium thiosulfate is used as photographic fixing agents. Magnesium sulfate, better known as Epsom salts, can be used as a laxative, a bath additive, an exfoliant, a magnesium supplement for plants, or a desiccant. Sulfur is used as a light-generating medium in the rare lighting fixtures known as sulfur lamps. Elemental sulfur crystals are commonly sought after by rock collectors for their brightly colored polyhedron shapes.

Biological role

Sulfur is an essential component of all living cells.
   Sulfur may also serve as chemical food source for some primitive organisms: some forms of bacteria use hydrogen sulfide (H₂S) in the place of water as the electron donor in a primitive photosynthesis-like process. Inorganic sulfur forms a part of iron-sulfur clusters, and sulfur is the bridging ligand in the Cu_A site of cytochrome c oxidase, a basic substance involved in utilization of oxygen by all aerobic life.
   Sulfur is absorbed by plants via the roots from soil as the sulfate ion and reduced to sulfide before it's incorporated into cysteine and other organic sulfur compounds (sulfur assimilation).
   In plants and animals the amino acids cysteine and methionine contain sulfur, as do all polypeptides, proteins, and enzymes which contain these amino acids. Homocysteine and taurine are other sulfur-containing acids which are similar in structure, but which are not coded for by DNA, and are not part of the primary structure of proteins. Glutathione is an important sulfur-containing tripeptide which plays a role in cells as a source of chemical reduction potential in the cell, through its sulfhydryl (-SH) moiety. Many important cellular enzymes use prosthetic groups ending with -SH moieties to handle reactions involving acyl-containing biochemicals: two common examples from basic metabolism are coenzyme A and alpha-lipoic acid. Disulfide bonds (S-S bonds) formed between cysteine residues in peptide chains are very important in protein assembly and structure. These strong covalent bonds between peptide chains give proteins a great deal of extra toughness and resiliency. For example, the high strength of feathers and hair is in part due to their high content of S-S bonds and their high content of cysteine and sulfur (eggs are high in sulfur because large amounts of the element are necessary for feather formation). The high disulfide content of hair and feathers contributes to their indigestibility, and also their odor when burned.

Environmental impact

The burning of coal and/or petroleum by industry and power plants creates sulfur dioxide (SO₂) which reacts with atmospheric water and oxygen to produce sulfuric acid (H₂SO₄). This sulfuric acid is a component of acid rain, which lowers the pH of soil and freshwater bodies, resulting in substantial damage to the natural environment and chemical weathering of statues and structures. Fuel standards increasingly require sulfur to be extracted from fossil fuels to prevent the formation of acid rain. This extracted sulfur is then refined and represents a large portion of sulfur production. In coal fired power plants, the flue gases are sometimes purified. In more modern power plants that use syngas the sulfur is extracted before the gas is burned.

History

Sulfur (Sanskrit, sulvari; Latin sulfur or sulpur) was known in ancient times, and is referred to in the Biblical Pentateuch (Genesis). The word itself is probably from the Arabic sufra meaning yellow, from the bright color of the naturally occurring form.
English translations of the Bible commonly refer to sulfur as "brimstone", giving rise to the name of 'Fire and brimstone' sermons, in which listeners are reminded of the fate of eternal damnation that awaits the unbelieving and unrepentant. It is from this part of the Bible that Hell is implied to "smell of sulfur", although as mentioned above sulfur is in fact odorless. The "smell of sulfur" usually refers to the odor of hydrogen sulfide, for example from rotten eggs. Burning sulfur produces sulfur dioxide, the smell associated with burnt matches.
Sulfur was known in China since the 6th century BC, in a natural form that the Chinese had called 'brimstone', or shiliuhuang that was found in Hanzhong. By the 3rd century, the Chinese discovered that sulfur could be extracted from pyrite.

Extraction

Sulfur is extracted by mainly two processes: the Sicilian process and the Frasch process. The Sicilian process, which was first used in Sicily, was used in ancient times to get sulfur from rocks present in volcanic regions. In this process, the sulfur deposits are piled and stacked in brick kilns built on sloping hillsides, and with airspaces between them. Then powdered sulfur is put on top of the sulfur deposit and ignited. As the sulfur burns, the heat melts the sulfur deposits, causing the molten sulfur to flow down the sloping hillside. The molten sulfur can then be collected in wooden buckets.
The second process used to obtain sulfur is the Frasch process. In this method, three concentric pipes are used: the outermost pipe contains superheated water, which melts the sulfur, and the innermost pipe is filled with hot compressed air, which serves to create foam and pressure. The resulting sulfur foam is then expelled through the middle pipe.
The Frasch process produces sulfur with a 99.5% purity content, and which needs no further purification. The sulfur produced by the Sicilian process must be purified by distillation.

Compounds

Hydrogen sulfide has the characteristic smell of rotten eggs. Dissolved in water, hydrogen sulfide is acidic and will react with metals to form a series of metal sulfides. Natural metal sulfides are common, especially those of iron. Iron sulfide is called pyrite, the so-called fool's gold. Pyrite can show semiconductor properties. Galena, a naturally occurring lead sulfide, was the first semiconductor discovered, and found a use as a signal rectifier in the "cat's whiskers" of early crystal radios.
   Many of the unpleasant odors of organic matter are based on sulfur-containing compounds such as methyl and ethyl mercaptan, also used to scent natural gas so that leaks are easily detectable. The odor of garlic and "skunk stink" are also caused by sulfur-containing organic compounds. Not all organic sulfur compounds smell unpleasant; for example, grapefruit mercaptan, a sulfur-containing monoterpenoid is responsible for the characteristic scent of grapefruit.
   Polymeric sulfur nitride has metallic properties even though it doesn't contain any metal atoms. This compound also has unusual electrical and optical properties. This polymer can be made from tetrasulfur tetranitride S₄N₄.
   Phosphorus sulfides are important in synthesis. For example, P₄S₁₀ and its derivatives Lawesson's reagent and naphthalen-1,8-diyl 1,3,2,4-dithiadiphosphetane 2,4-disulfide are used to replace oxygen from some organic molecules with sulfur. Inorganic sulfur compounds:

Sulfides (S²⁻), a complex family of compounds usually derived from S²⁻. Cadmium sulfide (CdS) is an example.
Sulfites (SO₃²⁻), the salts of sulfurous acid (H₂SO₃) which is generated by dissolving SO₂ in water. Sulfurous acid and the corresponding sulfites are fairly strong reducing agents. Other compounds derived from SO₂ include the pyrosulfite or metabisulfite ion (S₂O₅²⁻).
Sulfates (SO₄²⁻), the salts of sulfuric acid. Sulfuric acid also reacts with SO₃ in equimolar ratios to form pyrosulfuric acid (H₂S₂O₇).
Thiosulfates (sometimes referred to as thiosulfites or "hyposulfites") (S₂O₃²⁻). Thiosulfates are used in photographic fixing (HYPO) as reducing agents. Ammonium thiosulfate is being investigated as a cyanide replacement in leaching gold.(External Link)
Sodium dithionite, Na₂S₂O₄, is the highly reducing dianion derived from hyposulfurous/dithionous acid.
Sodium dithionate (Na₂S₂O₆).
Polythionic acids (H₂S_nO₆), where n can range from 3 to 80.
Peroxymonosulfuric acid (H₂SO₅) and peroxydisulfuric acids (H₂S₂O₈), made from the action of SO₃ on concentrated H₂O₂, and H₂SO₄ on concentrated H₂O₂ respectively.
Sodium polysulfides (Na₂S_x)
Sulfur hexafluoride, SF₆, a dense gas at ambient conditions, is used as nonreactive and nontoxic propellant
Sulfur nitrides are chain and cyclic compounds containing only S and N. Tetrasulfur tetranitride S₄N₄ is an example.
Thiocyanates contain the SCN⁻ group. Oxidation of thiocyanoate gives thiocyanogen, (SCN)₂ with the connectivity NCS-SCN.

Organic sulfur compounds (where R, R', and R are organic groups such as CH₃):

Thioethers have the form R-S-R′. These compounds are the sulfur equivalents of ethers.
Sulfonium ions have the formula RR'S-'R'", for example where three groups are attached to the cationic sulfur center. Dimethylsulfoniopropionate (DMSP; (CH₃)₂S⁺CH₂CH₂COO⁻) is a sulfonium ion, which is important in the marine organic sulfur cycle.
Thiols (also known as mercaptans) have the form R-SH. These are the sulfur equivalents of alcohols.
Thiolates ions have the form R-S^-. Such anions arise upon treatment of thiols with base.
Sulfoxides have the form R-S(=O)-R′. A common sulfoxide is DMSO.
Sulfones have the form R-S(=O)₂-R′. A common sulfone is sulfolane C₄H₈SO₂. See also and organosulfur chemistry
Isotopes
Sulfur has 18 isotopes, four of which are stable: ³²S (95.02%), ³³S (0.75%), ³⁴S (4.21%), and ³⁶S (0.02%). Other than ³⁵S, the radioactive isotopes of sulfur are all short lived. ³⁵S is formed from cosmic ray spallation of ⁴⁰argon in the atmosphere. It has a half-life of 87 days.
   When sulfide minerals are precipitated, isotopic equilibration among solids and liquid may cause small differences in the δS-34 values of co-genetic minerals. The differences between minerals can be used to estimate the temperature of equilibration. The δC-13 and δS-34 of coexisting carbonates and sulfides can be used to determine the pH and oxygen fugacity of the ore-bearing fluid during ore formation.
   In most forest ecosystems, sulfate is derived mostly from the atmosphere; weathering of ore minerals and evaporites also contribute some sulfur. Sulfur with a distinctive isotopic composition has been used to identify pollution sources, and enriched sulfur has been added as a tracer in hydrologic studies. Differences in the natural abundances can also be used in systems where there's sufficient variation in the ³⁴S of ecosystem components. Rocky Mountain lakes thought to be dominated by atmospheric sources of sulfate have been found to have different δS-34 values from lakes believed to be dominated by watershed sources of sulfate.
Precautions
Carbon disulfide, carbon oxysulfide, hydrogen sulfide, and sulfur dioxide should all be handled with care.
   Although sulfur dioxide is sufficiently safe to be used as a food additive in small amounts, at high concentrations it reacts with moisture to form sulfurous acid which in sufficient quantities may harm the lungs, eyes or other tissues. In organisms without lungs such as insects or plants, it otherwise prevents respiration. Hydrogen sulfide is toxic. Although very pungent at first, it quickly deadens the sense of smell, so potential victims may be unaware of its presence until it's too late.
Spelling
The element has traditionally been spelled sulphur in the United Kingdom, Ireland, Hong Kong, the Commonwealth Caribbean India and New Zealand, but sulfur in the United States, while both spellings are used in Australia and Canada. IUPAC adopted the spelling “sulfur” in 1990, as did the Royal Society of Chemistry Nomenclature Committee in 1992 and the Qualifications and Curriculum Authority for England and Wales recommended its use in 2000. The spelling of the term in non-official texts is gradually becoming uniform as sulfur.
   In Latin, the word is variously written sulpur, sulphur, and sulfur (the Oxford Latin Dictionary lists the spellings in this order). It is an original Latin name and not a Classical Greek loan, so the ph variant doesn't denote the Greek letter φ. Sulfur in Greek is theion (θεῖον), whence comes the prefix thio-. The simplification of the Latin word's p or ph to an f appears to have taken place towards the end of the classical period, with the f spelling becoming dominant in the medieval period.

External results
Click here for more details on Sulfur

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://sulfur.totallyexplained.com">Sulfur Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
   As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.

We see you're using Internet Explorer.  Try Firefox, we think you'll like it better.

      · Firefox blocks pop-up windows.
      · It stops viruses and spyware.
      · It keeps Microsoft from controlling the future of the internet.

Click the button on the right to download Firefox.  It's free.